How to maintain folding mask machine
How to maintain folding mask machine
In today's society, due to the continuous deterioration of the natural environment and the enhancement of people's awareness of protection, the market demand for disposable medical masks and protective masks continues to expand. Many customers are acutely aware of this business opportunity and hope to participate in the mask production industry. But in view of the mask production process, the purchase of mask raw materials, the selection of mask machine manufacturers, the planning of mask production workshop, the industry standard of mask production and so on are not familiar with, so when querying and consulting relevant information and making relevant budget, it seems very blind and confused.
In the process of producing masks, the maintenance of the integrated machine is very important. The integrated maintenance of the mask machine can not only delay the decline of the accuracy of the mask machine, but also reduce the possibility of the maintenance of the mask machine.
1. Appearance maintenance
Masks are the tools we wear on our faces, some even need to enter the operating room, so the production of masks must require cleaning the masks every day. After the power is turned off every day, it is necessary to organize the staff to clean the working surface of the equipment and the plates with masks. Be careful not to use water or oil. Use alcohol and other non-toxic and volatile cleaning fluid.
2. Maintenance of ultrasonic system
Check whether the ultrasonic system (composed of ultrasonic electric box, ultrasonic transducer, welding head and connecting wire) is clean, especially whether the ultrasonic electric box, ultrasonic transducer (sensing element) and welding head (mould) need to be cleaned without water and whether the connecting wire is firm. Often check the wear degree of the ultrasonic welding joint (die) of the folding mask machine. Carefully check whether the pointer of voltmeter and ammeter on the ultrasonic electric box is normal.
3. Drive system maintenance
The transmission system includes motor, gear, reducer, sprocket, chain, conveyor belt and other components. Check whether there is dust on the surface of the motor that affects the heat dissipation. Whether the gears and sprockets are oiled or fixed. Is the chain suitable for tightness and foreign matters? Are the connecting screws of each transmission part loose? Is there enough lubricating oil for the reducer? It is usually necessary to change the lubricating oil every 1000 to 1500 hours.
4. Maintenance of electrical system
Check whether the electrical connector of the respirator is loose, and whether the main power line, branch signal line, etc. are worn? ageing? Loose? Is the electric box clean and monotonous, and is the exhaust fan working normally?
5. Maintenance of pneumatic system
Pneumatic system is composed of air source filtration system, air pipe and air cylinder. Is there water in the air filter? (discharge water from air compressor: discharge water to air compressor in high humidity area every day) check whether air pipe leaks? Is the cylinder leaking? Whether the direction and operation of the air cylinder magnetic protection sensor are normal.
Folding mask machine equipment can not contact corrosive liquids and objects, for example, sweat is easy to rust equipment parts. If you do not use the equipment for a long time, please apply antirust oil on the rusty parts of the transmission system and the mask machine.
The mask manufacturer requires the necessary maintenance of the folding mask machine, which can not only reduce the maintenance times of the mask machine, but also improve the service life of the mask machine and the production capacity of the company.